![]() ![]() Configure uplinks ports on each switch.Īn uplink is a network port which connects to another switch, rather than a host device, and the key difference is how uplinks ports are configured.Configure the new VLAN on every switch on the network, as shown in the steps above.When working with larger networks of two or more switches, it is possible to extend a VLAN across all switches in the network. The steps in this article are not required for AVB.Īdvanced - networks of two or more switches Similarly, Dante devices can make use of IP multicast, and implementing a Dante VLAN with IGMP Snooping will help maximize bandwidth by ensuring each multicast flow is sent only to the devices configured to receive it.ĪVB audio automatically uses a dedicated VLAN (VLAN 2). There are many reasons to use VLANs, but perhaps the simplest and most common is to segregate different types of device from one another, especially when one or more makes heavy use of multicast.įor example, CobraNet's use of Ethernet multicast means it is good practice to isolate CobraNet devices by placing them onto their own VLAN. Like most managed switches, the Netgear GS724Tv4 provides the ability to segregate network traffic using Virtual LANs, or VLANs. This article explains how to configure a VLAN on a Netgear GS724Tv4 network switch. Advanced - networks of two or more switches.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |